This is our small 100mm by 70mm engine control panel.
The panel has all the basics that you need to run a small diesel engine on a boat.
Ignition switch ON-START functions.
Warning lights for engine charge, low oil pressure and hight water temp.
The panel comes with a short pigtail and a 8 way connector plug. There is a inline Blade type fuse in the pigtail.
The panel comes with a wiring diagram.
This is our basic instrument panel giving you all the basic functions that you need to run a small engine on a boat.
This panel has:
A tachometer with engine running hours meter.
A key switch with ON - START functions.
Two momentry toggle switches for engine preheat and engine stop if required.
Warning lights for Engine charge, low oil pressure and high water temp.
The panel and all its parts are IP67 waterproof and the panel material will never rust or fade.
The panel wiring runs to a 11 way connector, supplied with a full wiring diagram.
This panel is designed to work with the BMC 1.5, 1.7, 1.8, 2.2 and 2.5 diesel 4 cylinder engines.
The panel will allow for single or twin alternator systems.
The panel and all its parts are IP67 waterproof and the panel material will never rust or fade.
The panel has the following features:
Voltmeter, water temp gauge, oil pressure gauge.
Ignition switch with ON-PREHEAT-START functions.
warning lights for alternator 1&2, Low oil pressure and high water temp.
Panel breaker fuse.
The panel comes with sensor pack for the oil pressure and water temp gauge.
Panel is wired to a short pigtail with 11 way connector plug. Also supplied with full wiring diagram.
This is our compact deluxe instrument panel 160mm by 160mm size.
The panel and all its parts are IP67 waterproof and the panel material will never rust of fade.
The panel has two 52mm 2inch gauges. One to record the engine running hours and the other showing the voltage, pressure and temp or RPM, pressure and temp.
The panel also has a ignition switch with ON - START functions and a toggle switch for engine preheat and engine stop.
There are warning lights for engine charge, low oil pressure and high water temp.
The panel has a pigtail running to a 11 way multi plug. Supplied with full wiring diagram
This is our small blue panel. Size is 200mm by 200mm and fitted with 3 gauges - Oil Pressure, Water temp and 4000 RPM tacho with engine hours meter.
The panel also has a ignition switch for On and Start, pluse a toggle switch for Engine preheat (if required) and Stop engine (if required )
There are also warning lights for Charge (with buzzer), Low oil pressure (with buzzer) and high engine water temp.
A second alternator charge lamp can be fitted if required please contact us.
The panel is wired to the BMC thornicroft wiring layout using a 11 way female wiring connector on a pigtail. Panel supplied with a pin wiring diagram.
This is oue four gauge digital panel with USB charging.
The panel is 190mm by 190mm and the panel and all its parts are IP67 waterproof.
The panel has four 52mm - 2 inch gauges with stainless steel bezels and glass lenses. These are Fuel, Volts, Oil Pressure and water temp. All of the gauges will run on 12 or 24V.
The panel has a pull switch to turn the panel on. Two stainless steel push buttons lookafter starting and stopping the engine. There is a 5A USB charging port with rubber cover.
It has warning lights for low oil pressure, high water temp and engine preheat.
The panel has a pigtail running to a 11 way connector, it has a full wiring diagram.
This little panel is for those of you who have a standard instrument panel fitted to your engine and would like to add the extra couple of gauges.
This little panel 80mm by 165mm Can be used side on so 165mm by 80mm, has a water temp and oil pressure gauge fitted. The gauges have a selection of back lights (red, green, blue, white) so they will match with your origional boat panel.
The gauges are white with a stainless steel bezel and glass lenses
The panel comes with a pigtail and 4 way connector.