This is our basic marine diesel engine replacment panel for small engines'
It has all the basic functions for a pull to stop engine.
The panel is 100mm by 100mm
Key switch with ON-START functions.
Battery condition meter with engine running hours.
Warning lights for charge, low oil pressure and high water temp.
The panel is wired to a short pigtail with a 8 way multiplug. Full wiring diagram is supplied.
This is our standard BETA Marine replacment instrument panel.
The panel is 195 by 160mm and has been made by us in the UK. The panel and all its parts are IP67 waterproof and the panle material will never rust or fade.
The instrument panel has the following features:
Tacho with hours meter.
Volt meter.
Ignition switch with ON-HEAT-START functions.
Warning lights for Engine charge, Low oil pressure and High water temp.
The instrument panel has a pigtail running to a 11 way connector
This is our small deluxe instrument panel in blue with either white or black gauges.
The panel is 200mm by 200mm and has three 52mm 2inch gauges. A tachometer with hours run meter, a oil pressure gauge and a water temp gauge.
There are also warning lights for engine charge, low oil pressure and high water temp.
There is a ket switch with AUX-OFF-ON-START functions.
There is a toggle switch momentry for engine preheat and engine stop.
The panel and all its parts are IP67 waterproof and the panel material will never rust or fade in the sun.
This is our standard tachometer instrument panel plus 5Bar oil pressure gauge with warning light.
The panel 180mm by 150mm and all its parts are IP67 waterproof and the panel will never rust or fade.
The panel has a Tachometer 0 - 4000 RPM with hours meter. It als has a 5 bar oil pressure gauge with low oil pressure warning light.
There is a warning light for engine charging and ignition switch with ON-HEAT-START functions.
The panel has a pigtail running to a 11 way connector and is supplied with a full wiring diagram.