This is our ISUZU standard control panel for engines with twin alternators. This panel and all its parts are IP67 waterproof and the panel material will never rust or fade in the sun.

The panel is 180 by 160 mm

The panel has the standard 11 way connector and flyleads used in the origional manufacturer equipment. So this should just plug directly into the irigional wiring loom.

The panel has the following features:

Tacho with engine running hours meter.

Stainless steel toggle switch for engine preheat and engine stop.

ignition switch with ON-HEAT-START

Warning lights for battery set1, battery set2, low oil pressure and high water tempreture

This is our small deluxe instrument panel in blue with either white or black gauges.

The panel is 200mm by 200mm and has three 52mm 2inch gauges. A tachometer with hours run meter, a oil pressure gauge and a water temp gauge.

There are also warning lights for engine charge, low oil pressure and high water temp.

There is a ket switch with AUX-OFF-ON-START functions.

There is a toggle switch momentry for engine preheat and engine stop.

The panel and all its parts are IP67 waterproof and the panel material will never rust or fade in the sun.

This is our compact twin alternator deluxe instrument panel. Plug and play for all ISUZU engines using the 11 way multi plug with two fly leads.

This panel has two 52mm gauges for engine running hours and a three way multi gauge ( Water temp, RPM, Oil Pressure ). This gauge has bright LED reading for all three values that can be clearly seen in bright sunlight.

There are two charge lights one for each alternator. Warning lights for high water temp and low pol pressure. and warning buzzers for no battery charging and low oil pressure.

It has a toggle switch for heater plugs and engine stop and a key switch for ignition on and engine start.

If you are upgrading from a standard panel to the deluxe you will need to change the temp and pressure sensors which we have in stock.